Fornitore: OF AIR
Industrial Air Compressor for Laser Cutting Machine-OF AIR
Descrizione
Product overview
Overview
Industrial Air Compressor for Laser Cutting Machine-OF AIR
Industrial Air Compressor for Laser Cutting Machine-OF AIR is an industrial air compressor package for laser cutting buyers who need to evaluate air flow, pressure, dryer and filter configuration, model options, specifications, downloads, and ordering requirements before purchase.
Screw air compressor is the third generation of high efficiency positive displacement air compressor. Compared with the reciprocating compressor of the same capacity:
Best For
- Fiber laser cutting systems that need stable compressed air for assist-gas cutting workflows.
- Integrators comparing air flow, pressure, dryer, filtration, voltage, and compressor package configuration.
- Workshops planning a laser cutting air supply setup that must match machine power and site conditions.
Key Features
- Main parts are reduced to 1/4
- Volume reduction by 40%
- Noise reduction by 10-20DBA
- Efficiency increase by 10-20%
- Weight reduction by 15-20%
- Reliable quality: Integrated host, high temperature adaptability, and superior gas quality.
- Compact structure: Integration of main engine, oil-water separator, oil-water filter, and air filter, ensuring efficiency.
Compatibility
- This product currently has 15 listed options. Use the variant selector to choose the exact model, power level, voltage, package, or quantity before ordering.
- Example options include: CA15TB / 220V / 60 Hz; CA15TB / 380V / 50 Hz; CA15TB / 380V / 60 Hz; CA15TB / 415V / 50 Hz.
- Confirm air flow, pressure, dryer and filter configuration, voltage, site power, pipe layout, and the target laser cutting machine before ordering.
Specifications
Model Specifications
| Model | Motor power | Work pressure | Exhaust amount | Tank volume | Power | Suitable laser power |
|---|---|---|---|---|---|---|
| CA15TB | 15kw | 1.6MPa | 1.3m/min | 400L | 380v/50hz | 1000w-4000w |
| CB22TV | 22kw | 1.6MPa | 2.4m/min | 1000L | 380v/50hz | 6000w-12000w |
| CB37TV | 37kw | 1.6MPa | 3.6m/min | 1000L | 380v/50hz | 15000w-20000w |
Specification Table 2
| Category | Model | Quantity | Dimensions (cm) LxWxH | Weight (kg) | Image |
|---|---|---|---|---|---|
| Air Compressor | CA-15TB | 1 | 186x86x169 | 630 | |
| Air Compressor | CB-37TV | 1 | 218x108x185 | 650 | |
| Air Storage Tank | C-0.6/16kg | 1 | 218x78x75 | 300 | |
| Dryer | CB-3 | 1 | 57x36x178 | 90 | |
| Air Compressor | CB-22TV | 1 | 223x98x198 | 690 | |
| Air Storage Tank | C-0.6/16kg | 1 | 218x76x76 | 230 |
Downloads
OF AIR Data Sheet CA-15TB OF AIR Data Sheet CB-22TV OF AIR Data Sheet CB-37TV CA-15TB Data Sheet CB-22TV Data Sheet CB-37TV Data Sheet OF AIR Compressor Product CatalogBefore Ordering
Advanced performance: Uses frequency conversion control for stable output pressure and intelligent output of required air volume and pressure without fluctuations.
Maintenance: No special tools required, ensuring low use cost.
FAQ
Which Industrial Air Compressor for Laser Cutting Machine-OF AIR option should I choose?Select the exact model or variant that matches your machine, power level, interface, and application. If the project involves a retrofit or custom integration, confirm compatibility before ordering.
Is Industrial Air Compressor for Laser Cutting Machine-OF AIR suitable for every laser product project?No. Final suitability depends on the selected variant, machine configuration, material, process target, and site conditions. Use the specifications and compatibility notes as a pre-check, then confirm uncertain details before purchase.
Are manuals or technical files available?Use the Downloads section on this page for available manuals, guides, wiring instructions, datasheets, STEP files, or other technical references.
